Upon customer´s request or based on previous agreement and with regard to ever increasing demands for high quality of the supplied products it is possible to apply a sorting operation in the manufacturing process.
Electronic sorting device:
Device description
- The electronic sorting device measures a product optically by means of cameras, it records the measured values automatically, it eliminates faulty pieces and assesses the process statistically.
- The checking device consists of a hopper, a conveying system, a checking unit and a control processor.
Parameters monitored
- Head and thread diameter
- Pitch of thread, angle of thread
- Length of screw, length of shank, height of head
- Diameter of cylindrical parts of screw
- Thickness of washer
- Dimension of hexagon
- Presence of installed washer
- Presence of internal clamps (torx, hex key)
Product range
- Screws of length 8 – 45 mm
- Screws of diameter M2,5 – M10
Mechanical sorting devices
Device description
- The mechanical device consists of two cylinders set to the required sorting diameter.
- The checking device consists of a hopper, a conveying system, and a checking unit.
Use
- Sorting screws with regard to impurities
- Sorting screws with regard to head diameter (screw with cylindrical head)
- Sorting washers with regard to thickness
Manual checking
Use
Sorting screws with regard to visible faults